HYPERFORM® Thermoplastic Elastomer Tubing
$100.00

Physical Element
- Technical Data Sheet
- Contains styrenic based thermoplastic elastomer
- Soft, pliable, seamless; in various colors
- Talc free, nontacky
- Environmentally friendly - manufactured with no ozone depleting chemicals
- Can be Gamma, ETO sterilized
- Tensile Strength
- Ultimate Elongation
- 100% Modulus
- 300% Modulus
- 500% Modulus
- Density (gm/cm3)
- Melting Temp (F)
- Minimum Continuous use Temp. (F)
- Maximum Continuous use Temp. (F)
- Stiffening Temp (F)
- Brittle Temp (F)
- Weather Resistance
- Ozone Resistance
- Odor
- Hardness Durometer (shore A)
- Compression Set Rating
- Tear Resistance
- Abrasion Resistance
-
HT-0100
-
HT-2600
-
HT-0300
- Yes
- Yes
- Yes
- Yes
- Yes
- 500 psi
- 950%
- 40
- 75
- 100
- 0.85
- 350
- Not Tested
- Not Tested
- Not Tested
- Not Tested
- Fair to Good
- Good
- Good
- 26-31
- Fair
- 55
- Good
Rubber Cord
Rubber cord is tubing with a solid center and is available in two materials - natural rubber and synthetic rubber.
Rubber Profiles
Hygenic can manufacture extruded custom profiles from almost any elastomeric compound we make.
Q: What sizes of HYPERFORM ™ Tubing are available?
All of our HYPERFORM tubing is manufactured on a custom order basis. Generally, we can make HYPERFORM tubing in OD’s up to 0.500” (12.7mm) but it is dependent on the ID and wall combination.
Q: What colors are available?
HYPERFORMTM Tubing can be made opaque or translucent in the following standard colors: clear, red, yellow, green, blue, black, purple, teal, aqua, gray, and lime green.
Q: What is the minimum order requirement?
The minimum order requirement will vary depending on the size, color and formulation.
Q: What are some of the physical properties of HYERPFORM™ tubing?
We have several formulations available. Please refer to the Formulations tab for typical physical properties of our current formulations. We can also custom formulate HYPERFORM to meet your requirements.