HYPERFORM® Thermoplastic Elastomer Tubing $100.00

HYPERFORM® Thermoplastic Elastomer Tubing

HYPERFORM© Thermoplastic Elastomer Tubing

HYPERFORM® Elastomeric Tubing

HYPERFORM® Thermoplastic Elastomer tubing is a thermoplastic polymer that mimics many of the properties of natural rubber and silicone. HYPERFORM can be a suitable alternative to natural rubber latex and silicone tubing. Like synthetic rubber, thermoplastic is made from a petrochemical material source, but no curatives are required. Therefore, this makes an end product with fewer extractables, creating product solutions that can be designed within established ASTM and/or FDA standards. HYPERFORM Thermoplastic Elastomer tubing has been successfully tested to the ISO 10993 standard for various medical applications.

 

Features:

  • Soft (low durometer) tubing
  •  
  • Good flexibility
  •  
  • Good recovery
  •  
  • More resistant to ozone than natural rubber latex tubing
  •  
  • Available in a variety of standard colors or clear
  •  
  • Available in a wide variety of sizes
  •  
  • Can be opaque or translucent

If you think our HYPERFORM Thermoplastic Elastomer Tubing is the solution for your next application, email us for a quote*.

*minimum order quantities will vary

Physical Element

  • Technical Data Sheet
  • Contains styrenic based thermoplastic elastomer
  • Soft, pliable, seamless; in various colors
  • Talc free, nontacky
  • Environmentally friendly - manufactured with no ozone depleting chemicals
  • Can be Gamma, ETO sterilized
  • Tensile Strength
  • Ultimate Elongation
  • 100% Modulus
  • 300% Modulus
  • 500% Modulus
  • Density (gm/cm3)
  • Melting Temp (F)
  • Minimum Continuous use Temp. (F)
  • Maximum Continuous use Temp. (F)
  • Stiffening Temp (F)
  • Brittle Temp (F)
  • Weather Resistance
  • Ozone Resistance
  • Odor
  • Hardness Durometer (shore A)
  • Compression Set Rating
  • Tear Resistance
  • Abrasion Resistance
  • HT-0100

    • PDF
    • Yes
    • Yes
    • Yes
    • Yes
    • Yes
    • 1600 psi
    • 950%
    • 95
    • 150
    • 250
    • 0.9
    • 350
    • Not Tested
    • Not Tested
    • Not Tested
    • Not Tested
    • Fair to Good
    • Fair
    • Good
    • 26-31
    • Poor
    • 135
    • Good
  • HT-2600

    • PDF
    • Yes
    • Yes
    • Yes
    • Yes
    • Yes
    • 2100 psi
    • 790%
    • 100
    • 195
    • 600
    • 0.88-0.92
    • 380
    • Not Tested
    • Not Tested
    • Not Tested
    • Not Tested
    • Fair to Good
    • Good
    • Good
    • 32-38
    • Good
    • 150
    • Good
  • HT-0300

    • Yes
    • Yes
    • Yes
    • Yes
    • Yes
    • 500 psi
    • 950%
    • 40
    • 75
    • 100
    • 0.85
    • 350
    • Not Tested
    • Not Tested
    • Not Tested
    • Not Tested
    • Fair to Good
    • Good
    • Good
    • 26-31
    • Fair
    • 55
    • Good

Rubber Cord

Rubber cord is tubing with a solid center and is available in two materials - natural rubber and synthetic rubber.

Rubber Profiles

Hygenic can manufacture extruded custom profiles from almost any elastomeric compound we make.

Q: What sizes of HYPERFORM ™ Tubing are available?
All of our HYPERFORM tubing is manufactured on a custom order basis. Generally, we can make HYPERFORM tubing in OD’s up to 0.500” (12.7mm) but it is dependent on the ID and wall combination.
Q: What colors are available?

HYPERFORMTM Tubing can be made opaque or translucent in the following standard colors: clear, red, yellow, green, blue, black, purple, teal, aqua, gray, and lime green. 

Q: What is the minimum order requirement?
The minimum order requirement will vary depending on the size, color and formulation.
Q: What are some of the physical properties of HYERPFORM™ tubing?
We have several formulations available.  Please refer to the Formulations tab for typical physical properties of our current formulations.  We can also custom formulate HYPERFORM to meet your requirements.